Technics DP-1810P - Manual (Page 30)

30
Function Setting
■ ■ ■ ■ ■
Changing the Auto Exposure Setting
You can select whether the copying density is adjusted automatically for text and photographic
originals.
1 Press the Function Key
2
# Press the 2 key to select COPIER SETTINGS.
$ Press the SET key.
% Press 8 and SET key to select AUTO
EXPOSURE MODE.
& Press 1 or 2 key whether Auto Exposure is to be
carried out or not.
( Press the SET key to set up the AUTO
EXPOSURE MODE.
) Press the RESET key to exit the Function mode.
Function
Proceed as Follows:
FUNCTION MODE (1-2)
ENTER NO. OR
∨ ∧
COPIER PARAM. (00-14)
ENTER NO. OR
∨ ∧
2:COPIER SETTINGS
PRESS SET TO SELECT
08 AUTO EXPOSURE
2:VALID