Teac WR-DA7 - Manual (Page 17)

18
During ADAT playback there will be no playback while ALL INPUT is ON. ALL INPUT must be
turned OFF.
BRC setting
Select the Fixed Mode when the BRC is used as a word clock master and the sampling rate is set at
48kHz. Select the Variable Mode when the sampling rate is set at 44.1kHz. Press the PITCH DOWN
switch to make setting at -147cent ( ‘44.1’ display).
For MTC setting, set MIDI in the GEN SYNC setting at ‘MTC’ and turn on the GEN SYNC switch.
For SMPTE setting set SMPTE in the GEN SYNC setting at ‘-10dB’ and turn on the GEN SYNC
switch.
To obtain a timecode output from the BRC during FF/REW operations in the ADAT, obtain a display
of 8: Output Rew/FF SMPTE & MTC: for ‘ON’ in MIDI/UTIL setting of the BRC.
To accomplish MMC operation, there must be coincidence of the MIDI channel between the WR-
DA7 and the MMC’s MIDI channel of the BRC. On the BRC, obtain a display of 11: MIDI Device
screen by MIDI/UTIL setting. Set the value of ‘MIDI channel set for the WR-DA7 - 1.’ Otherwise, set-
ting should be set to ‘ALL.’