Toshiba STRATA CIX - Manual (Page 123)

System Error Codes
Station Programming Error Codes
Strata CIX/CTX Telephone Button Programming 11/04
2-7
Sy
stem
Er
ro
r
C
odes
205
33 540 The door lock number entered is out of the range.
33 900 The application number entered is out of the range.
48
-
Required parameter for each Feature Code is not entered.
49 FB01
110 Two or more PhDNs with the same value are registered to one
extension.
49 FB01
700
790
800
810
820
830 Only Feature Code(s) allowed for Attendant Console is
registered.
49 FB01
610 Two or more DSSs with the same value are registered to one
extension.
49 FB01
120
130
560
610 While assigning sub-parameters to a DN: A DN was selected
that does not exist in the system.
51 FB01
The Primary DN entered conflicts with a value of an existing
numbering scheme.
51
110 The Primary DN entered conflicts with a value of an existing
numbering scheme.
51 FB01
120
130 When assigning an Owner DN to a CO or GCO, the related
CO or GCO buttons are not assigned to the respective FB(s)
of the owner's extension.
52
The Primary DN entered conflicts with a value of an existing
numbering scheme.
52 FB01
110 The Secondary/PhDN entered is already used in ISDN
extenstion(s), etc.
52 FB01
120
130 The CO or GCO Owner DN entered does not exist.
80 FB00 The PrimeDN does not exist in the system.
82 - The sub-parameter values assigned to the FB are invalid.
82 120 The line number entered does not exist.
96 -
110
130
140 The maximum allowable value for GCO, POOL, or PhDN has
been exceeded.
98
FB01
FB04 The quantity of Flexible keys programmed exceeds the
system's capacity.
Program Code FB
Sub-
parameter
Error Descriptions