Toshiba STRATA CIX - Manual (Page 53)

Telephone Button Programming
200 Series Programs
Strata CIX/CTX Telephone Button Programming 11/04
1-49
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
214 DSS Console
Assignment
214 , Hold
This assignment allows up to eight Direct Station Selection (DSS)
Consoles to be assigned to a station. The assignment is referenced to
the stationsís Primary DN.
214-00 Primary DN
n, Hold
n = Up to 5 digits Enter the Prime Directory Number of the station that is to be
associated with the DSS console(s).
214-
01~08 DSS 1~DSS 8
FB01 ~ FB08 , xxyyzz,
Hold , Hold
xx =
yy =
zz = Cabinet (01~07)
Slot (01~10)
Circuit (01~08) Enter the DSS equipment number as xxyyzz.
• Cabinet ñ Select 01 for Base and Expansion cabinet (CTX100).
Select 01 for Base and 02~07 respectively for each Expansion
cabinet (CTX670).
• Slot ñ Select 01~04 for Base slots and 05~08 for Expansion slots
(CTX100).
Select 01~08 for Base slots and 01~10 for Expansion slots.
Example: If the DSS console should be connected to a PDKU or
BDKU/BDKS in cabinet shelf 5, slot 2, circuit 3, enter 050203.
Note If a PDN is assigned to the DSS equipment number it must
be deleted, using PRG201, before attempting to assign the
DSS console.
215 DSS Feature Keys
215 , Hold
The Feature Key assignment allows each key on the telephone to be
addressed and assigned a code representing the function to be
performed. Some feature keys require additional parameters to
completely define the key. For example, a Phantom DN needs a
directory number, ringing assignment, and the tone pitch when
ringing occurs.
215-00 PDN+DSS
yyyyyx, Hold
yyyyy = Primary DN (0~99999) Enter a Primary DN plus DSS Key Assignment button to program
DSS FBs.
Note FB04 Add on Modules in Program 204 must be set to One or
Two.
x = DSS (1~8)
Table 1-25 Programs 208~218 (continued)
Button Sequence Value(s) Summary