Controls and displays 05 – Technicolor - Thomson XRB3059-A User Manual

Page 24

Advertising
background image

Controls and displays

05

24

En

DIGITAL

– Lights when a digital audio

signal is detected.

2

DIGITAL

– Lights when a Dolby Digital

encoded signal is detected.

ANALOG

– Lights when an analog signal is

detected.

DTS

– Lights when a source with DTS

encoded audio signals is detected.

2

Lights to indicate decoding of a DTS
multichannel signal.

3

2

DIGITAL

Lights to indicate decoding of a Dolby Digital
multichannel signal.

4

2

PRO LOGIC II

x

2

PRO LOGIC II

lights to indicate Pro Logic II

decoding.

2

PRO LOGIC II

x

lights to indicate

Pro Logic IIx decoding (see

Listening in

surround sound

on page 28).

5

VIR.SB

Lights during Virtual surround back
processing (page 31).

6

DIRECT

Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.

7

AUTO SURR.

Lights when Auto Surround (see

Auto playback

on page 28) is on.

8

ATT

Lights when

ANALOG ATT

is used to

attenuate (reduce) the level of the analog input
signal.

9

SLEEP

Lights when the sleep mode is active (see

Remote control

below).

10

Tuner

indicators

Lights when the mono mode is set

using the

MPX

button.

Lights when a stereo FM broadcast is

being received in auto stereo mode.

Lights when a broadcast is being

received.

11 Speaker indicators

Lights to indicate the current speaker system,

A

and/or

B

(page 54).

12 Character display

13

Neo:6

Lights to indicate Neo:6 processing.

14

ADV.SURR

. (Advanced Surround)

Lights when one of the Advanced Surround
modes has been selected.

15 WMA9 Pro

Lights to indicate decoding of a WMA9 Pro
signal.

16

MIDNIGHT

Lights during Midnight listening (page 32).

17 D.E.

Lights when Dialog Enhancement (

DIALOG

E

)

is switched on (page 32).

18

LOUDNESS

Lights during Loudness listening (page 32).

19 EX

Lights when a Dolby Digital Surround EX
encoded signal is detected.

20 Master volume level

21 MCACC channel EQ indicators

These indicators show the EQ balance for each
channel in

Checking your Acoustic Calibration

EQ settings

on page 41. Also,

L and R light

when the Sound Retriever is active (page 32).

VSX_816.book.fm 24 ページ 2006年2月20日 月曜日 午後2時14分

Advertising