Technicolor - Thomson XRB3059-A - Manual (Page 28)

Listening to your system 06
28
En
Chapter 6:
Listening to your system
Important
• Certain features explained in this section
will not be possible depending on the
source (for example, PCM 88.2 kHz / 96
kHz, DTS 96 kHz (24 bit) or WMA 9 Pro
sources).
Auto playback
The simplest, most direct listening option is the
Auto Surround feature. With this, the receiver
automatically detects what kind of source
you’re playing and selects multichannel or
stereo playback as necessary.
1
• While listening to a source, press AUTO
SURR for auto playback of a source.
AUTOSURR.
shows briefly in the display (it will
then show the decoding or playback format).
Check the digital format indicators in the
display to see how the source is being
processed.
Listening in surround sound
Using this receiver, you can listen to any
source in surround sound. However, the
options available will depend on your speaker
setup and the type of source you’re listening to.
If you connected surround back speakers, see
also
Using surround back channel processing
on page 31. 2
The following modes provide basic surround
sound for stereo and multichannel sources.
• While listening to a source, press
STANDARD.
If necessary, press repeatedly to select a
listening mode.
• If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
With two channel sources , you can select from:
• 2 Pro Logic IIx MOVIE – Up to 7.1
channel sound, especially suited to movie
sources
• 2 Pro Logic IIx MUSIC – Up to 7.1
channel sound, especially suited to music
sources
• 2 Pro Logic IIx GAME – Up to 7.1
channel sound, especially suited for video
games
• 2 PRO LOGIC – 4.1 channel surround
sound (sound from the surround speakers
is mono)
• Neo:6 CINEMA – 6.1 channel sound,
especially suited to movie sources
• Neo:6 MUSIC – 6.1 channel sound,
especially suited to music sources
With multichannel sources, if you have
connected surround back speaker(s) and have
selected
SB ON , you can select (according to
format):
Note
1 • Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see Listening
in surround sound above for more on these decoding formats).
• The Auto Surround feature is canceled if you connect headphones or select the multichannel analog inputs.
2 If surround back processing (page 31) is switched to OFF , or the surround back speakers are set to NO (page 42) (this happens
automatically if the Surround back speaker setting on page 36 is set to anything but Normal (SB) ), 2 Pro Logic IIx becomes 2
Pro Logic II (5.1 channel sound).
AUTO SURR STANDARD ADV.SURR STEREO
AUTO SURR STANDARD ADV.SURR STEREO
VSX_816.book.fm 28 ページ ２００６年２月２０日 月曜日 午後２時１４分