TravRoute CoPilot Live - Manual (Page 6)

- 4 -
Installing CoPilot
Installing From a Quickstart Installation Memory Card:
1. Set up your phone and charge the battery following the
instructions in your phone’s manual.
2. You must set the correct date and GMT time on your phone for
optimal GPS functionality.
3. Your CoPilot Live satellite navigation software is supplied pre-
loaded on a storage card. Insert your CoPilot storage card into
the slot of your phone.
4. Once the CoPilot storage card is inserted, CoPilot will install
automatically. See the instructions below for what to do if
installation does not begin automatically.
5. You will be prompted to choose a location for ‘CoPilot
Smartphone’. Select ‘phone’ from the pick list and press
‘Done’.
6. You will see ‘copilotsp2003.cab’ being installed. Once
completed, the message ‘CoPilot.SP2003.CAB was
successfully installed on your device’ will be displayed.
Select ‘OK’.
7. Installation is now complete and you will be returned to your
phone’s Home screen. Press Start | More | CoPilot to launch
CoPilot.
NOTE: You may receive a message that states “Application came
from an Unknown Source. Would you like to install anyway?”
Click “Yes” to this message to install CoPilot.
If Installation Does Not Start Automatically:
1. From your phone’s Home screen select Start | Accessories |
File Manager.
2. Select the Storage Card folder and then the 2577 folder.
3. Scroll down the page and select AUTORUN.EXE —
installation should now begin.
Installing From CD’s:
Your desktop/laptop and Smartphone should both be turned on. The
cradle/cable for your mobile device must be connected to your desktop
through either a USB or Serial port. Your Smartphone should be
connected to your desktop via ActiveSync (see p. 3).
Installation Steps:
Step 1: Insert the CoPilot Install Disc into your CD-ROM drive. After
a few seconds, the Installation Wizard will open. Follow the
instructions, entering your Installation Product Key when
prompted. This Product Key can be found on the back cover
of your printed CoPilot Quick Start Guide or on the supplied
Product Key card.
The CoPilot application will be installed to your desktop PC
and to your Smartphone separately. The Smartphone installation
will ask if the default location (the device’s storage memory) is
where you want the application to be placed.
Step 2: When the installation is complete, a CoPilot icon will appear on
your desktop. Click Finish to close the Installation Wizard.
Step 3: The fi rst time you open CoPilot on your Smartphone, you will
be asked to activate the product.
Product Key Entry and Activation
The fi rst time you launch CoPilot on your phone you will be prompted
for your product key. You can fi nd this key on the back cover of your
printed CoPilot Quick Start Guide. Input the product key carefully. and
press Done.
TIP: It is recommended that you switch off T9 predictive text entry
when inputting your product key.
You will now be asked to activate your CoPilot license within 3 days.
Select one of the three methods below to activate your CoPilot license.
Alternatively, press Menu followed by Later if you would prefer to
activate afterwards at your convenience, within the next 3 days.