TravRoute CoPilot Live - Manual (Page 7)

- 5 -
Three Ways to Activate:
1. Recommended: Automatic Activation using your phone’s
Wireless Internet Connection
a. Select the ACTIVATE soft key.
b. Select MENU then AUTOMATIC.
c. Enter your e-mail address and press NEXT. CoPilot will now
activate over the Internet.
d. Once complete, you will see the message ‘license activated
successfully’. Select Done.
e. (If installing a Europe region upgrade) You will now be asked to
confi rm the map region that you wish to activate. ‘United States’
should be displayed. Select Done.
f. (If installing a Europe region upgrade) You will be reminded that ‘Your
region cannot be changed
once it is selected’. Select Done.
g. Activation is now completed.
2. Automatic Activation via an Internet-connected Desktop PC
or Laptop
Connect your Smartphone to an Internet-enabled Desktop or
Laptop using the supplied Synchronisation cable, and Microsoft
ActiveSync software on your desktop PC or Laptop. Make sure your
desktop/laptop is connected to the Internet, then follow the steps
outlined above.
3. Manual Activation (requires an Internet-connected computer)
a. Select the ACTIVATE soft key.
b. On the following screen select MENU | MANUAL.
c. On the next screen you’ll see your Product Key and License ID.
You need this information to manually activate CoPilot as follows:
d. On a desktop/laptop go to the Internet site http://activate.alk.
com and enter the information. You will be given an activation
code.
e. Enter the activation code into the phone when prompted and
select Next.
f. Once complete, you will see the message ‘license activated
successfully’. Select Done.
g. (If installing a Europe region upgrade) You must now confi rm the
map region that you wish to activate. ‘United States’ should be
displayed. Select ‘Done’.
h. (If installing a Europe region upgrade) You will be reminded that
‘Your region cannot be changed once it is selected’. Select
Done.
i. Activation is now completed.
Changing the Voice Option at Any Time
CoPilot offers one or both of the following voice options, depending on
your selected language:
• Male Pre-Recorded Sound Files
• Female Pre-Recorded Sound Files
To change the voice option:
1. Open CoPilot.
2. In the Welcome screen select the Options icon; or in the Going
To screen or guidance screen press the Menu soft key and select
Options.
3. Select Language & Speech from the Options menu.
4. Under Language use the right or left key to open a pick list of
languages and change your language setting.
5. Under Voice use the right or left key to toggle between Male and
Female.
6. To hear your selection before exiting this screen, press Test.
7. When fi nished, press Done.