Thermador KBUIT4250A User Manual
Page 10
10
C u s t o m Pa n e l s
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimensional drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (
±)
¹⁄₁₆ in. (1.5 mm) tolerance.
Panels that are more than
¹⁄₄ in. (6 mm) thick must be routed. If
panels are less than
¹⁄₄ in. (6 mm) thick, install a filler panel
between the doors and decorative panels.
Top Grille Panel
The top panel SHOULD NOT WEIGH more than 10 lbs. (4.5 kg)
total weight.
Door Panels for Non-dispenser Models
The freezer panel SHOULD NOT WEIGH more than 30 lbs.
(13.5 kg) total weight. The refrigerator panel SHOULD NOT
WEIGH more than 50 lbs. (23 kg) total weight.
Door Panels for Dispenser Models
The two freezer panels combined SHOULD NOT WEIGH more
than 30 lbs. (13.5 kg) total weight. The refrigerator panel
SHOULD NOT WEIGH more than 50 lbs. (23 kg) total weight.
Model
A
42 in. (106 cm)
48 in. (122 cm)
40
¹⁄₂ in. (105 cm)
46
¹⁄₂ in. (120 cm)
Model
A
B
42 in. (106 cm)
48 in. (122 cm)
16
³⁄₄ in. (43 cm)
19
¹⁄₄ in. (49 cm)
22
³⁄₄ in. (58 cm)
26
¹⁄₄ in. (67 cm)
A
7
¹⁄₄
"
(18.4 cm)
70
7
/
16
"
(179 cm)
A
B
Model
A
B
42 in. (106 cm)
48 in. (122 cm)
16
³⁄₄ in. (43 cm)
19
¹⁄₄ in. (49 cm)
22
³⁄₄ in. (58 cm)
26
¹⁄₄ in. (67 cm)
70
7
/
16
"
(179 cm)
23
7
/
16
"
(60 cm)
34
7
/
16
"
(87 cm)
A
B