Forward tipping radius, Side tipping radius – Thermador KBUIT4250A User Manual
Page 7
7
T i p p i n g R a d i u s
Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
■
The dolly wheel height must be added to the tipping radius
when a dolly is used.
■
If needed, the tipping radius can be reduced. See “Reduce
Tipping Radius.”
Forward Tipping Radius
The forward tipping radius is the same for all models.
Side Tipping Radius
The side tipping radius varies depending upon the width of the
model. Use the chart provided to determine the side tipping
radius.
D o o r S w i n g D i m e n s i o n s
The location must permit both doors to open to a minimum of
90°. Allow 4
¹⁄₂ in. (11.4 cm) minimum space between the side of
the refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay
panels or custom handles.
To adjust the door swing, see “Adjust Doors.”
42 in. (106 cm) Models
48 in. (122 cm) Models
Model
Tipping Radius A
42 in. (106 cm)
48 in. (122 cm)
93 in. (236.2 cm)
96 in. (243.8 cm)
87
1
/
4
"
(222 cm)
A
130˚
130˚
90˚
90˚
110˚
110˚
47"
(119 cm)
42
9
/
16
"
(108 cm)
23
1
/
4
"
(59 cm)
17
1
/
2
"
(44 cm)
38"
(97 cm)
41"
(104 cm)
130˚
130˚
90˚
90˚
110˚
110˚
50
1
/
2
"
(128 cm)
45
1
/
4
"
(115 cm)
26
3
/
4
"
(68 cm)
19
3
/
4
"
(50 cm)
40"
(102 cm)
43
1
/
2
"
(110 cm)