Toshiba E.STUDIO e-STUDIO 523 - Manual (Page 114)

112
4.SETTING ITEMS (ADMIN)
3.SETTING NETWORK FUNCTIONS (Cont.)
4
2 Press the [IPv4] button.
• The TCP/IP screen is displayed.
3 Press the [DYNAMIC] button in the “ADDRESS MODE” option.
4 Press the [ENTER] button.
• Returns you to the NETWORK menu.
5 Continue to another network setting if required, then press the
[APPLY NOW] button.
• The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network inter-
face card to apply the changes.