Toshiba E.STUDIO e-STUDIO 523 - Manual (Page 157)

155
4
2 Press the [RX PRINT] button.
3 Press the [ON] button of the “DUPLEX PRINT”, and then press the
[ENTER] button.
• The registered items can be confirmed in the function list. P.174
Duplex printing direction differs depending on the received original size.
• Received LD, LG, LT, A3, A4, or B4-sized originals are printed so that they can be bound alone the long edge
of direction.
• Received ST, A5 or B5-sized originals are printed so that they can be bound alone the short edge of direction.
Setting the Rotate Sort
• The “Rotate Sort” function is available only when the optional Fax unit is installed.
• The “Rotate Sort” function is available only when no finisher is installed.
The printer setting determines whether or not to output each separate job of received originals in the differ-
ent orientation.
*
Rotate Sort printing is available only for LT/A4-sized paper. Set the LT and LT-R, or A4 and A4-R draw-
ers.
* When the system runs out of paper during Rotate Sort printing, the rest of the documents is printed on
the remaining paper.