Toshiba E.STUDIO e-STUDIO 523 - Manual (Page 124)

122
4.SETTING ITEMS (ADMIN)
3.SETTING NETWORK FUNCTIONS (Cont.)
4
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. P.91
2 Press the [IPv6] button.
• The IPv6 screen is displayed.
3 Specify the following items as required.
• IPv6 PROTOCOL—Press the [ENABLE] button to enable the IPv6 protocol, or [DISABLE] button to disable
the IPV6 protocol.
• LLMNR—Press the [ENABLE] button to enable the LLMNR (Linklocal Multicast Name Resolution) protocol, or
[DISABLE] button to disable the LLMNR protocol.
• ADDRESS MODE—Select the [STATEFUL] button.
• Link Local Address—The unique address used for the IPv6 is displayed.
• Link Local Address cannot be connected to another routed IPv6 network.
• The [ENABLE] and [DISABLE] buttons for the LLMNR protocol are available when you select the [ENABLE]
button for the IPv6 protocol.
4 Press the [Next] button.
• IPv6 (Manual/Stateful Address) screen is displayed.