TP-Link TL-WR543G - Manual (Page 12)

TL-WR543G 54M Wireless AP Client Router User Guide
- 3 -
¾ Provides WPA/WPA2 and 64/128/152-bit WEP encryption security.
¾ Supports PPPoE, Dynamic IP, Static IP, L2TP, PPTP and Big Pond Cable Internet Access.
(AP Router mode only)
¾ Built-in NAT and DHCP server supporting static IP address distributing.
¾ Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
¾ Support Port QoS.
¾ Supports Parental Control, Virtual Server, Special Application and DMZ host.
¾ Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address
filtering.
¾ Provides WLAN ACL (Access Control List) (AP Router mode only).
¾ Supports configuration backup/restore and firmware upgrade.
¾ Supports Web management.
¾ Detachable Antenna (reverse SMA connector).
2.3 Panel Layout
2.3.1 The Front Panel
The front panel of the TL-WR543G consists of several LED indicators, which is designed to
indicate connections. View from left to right. Table 2-1 describes the LEDs on the front panel of the
router.
Figure 2-1 Front Panel sketch
2.3.2 LED Explanation