TP-Link TL-WR543G - Manual (Page 70)

TL-WR543G 54M Wireless AP Client Router User Guide
- 61 -
Figure 5-61 Statistics
¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable,
click the Enable button. If disabled, the function of DoS protection in Security settings
will be ineffective.
¾ Packets Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval indicates the time section of
the packets statistic.
¾ Sorted Rules - Here displays sort as desired
Statistics Table:
IP Address The IP Address displayed with statistics
Packets The total amount of packets received and transmitted by the router.
Total
Bytes The total amount of bytes received and transmitted by the router.
Packets
The total amount of packets received and transmitted in the last Packets
Statistic interval
seconds.
Bytes
The total amount of bytes received and transmitted in the last Packets
Statistic interval
seconds.
ICMP
Tx The total amount of the ICMP packets transmitted to WAN in the last
Packets Statistic interval
seconds.
UDP
Tx The total amount of the UDP packets transmitted to WAN in the last
Packets Statistic interval
seconds.
Current
TCP
SYN
Tx The total amount of the TCP SYN packets transmitted to WAN in the last
Packets Statistic interval
seconds.
Click the Save button to save the Packets Statistic interval value.
Click the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.