TP-Link TL-WR543G - Manual (Page 35)

TL-WR543G 54M Wireless AP Client Router User Guide
- 26 -
¾ Your PC's MAC Address - This field displays the MAC address of the PC that is managing
the router. If the MAC address is required, you can click the Clone MAC Address button
and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save button to save your settings.
)
Note:
1) Only the PC on your LAN can use the MAC Address Clone feature.
2) If you click the Save button, the router will prompt you to reboot.
5.6 Wireless
Figure 5-15 Wireless menu
There are four submenus under the Wireless menu (shown in Figure 5-15): Wireless Settings,
Advanced Settings
, Site Survey, MAC Filtering and Wireless Statistics. Click any of them,
and you will be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
)
Note:
The MAC Filtering is only available in the AP mode.
5.6.1 Wireless Settings
The basic settings for the wireless network in AP Client mode are set on this page. In AP Client
mode, some options (Region, Channel Mode, Enable Wireless Router Radio, Enable Bridges
and Enable SSID Broadcast)
are not available and could not be modified. Figure 5-16: