TP-Link TL-WR543G - Manual (Page 56)

TL-WR543G 54M Wireless AP Client Router User Guide
- 47 -
field means all websites on the Internet. For example: www.xxyy.com.cn , .net.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save this entry.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete .
2. Modify the information.
3. Click
the Save button.
Click the Enabled All button to make all entries enabled.
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and the Previous button to return to the previous
page.
For example, if you want to block the PC(s) on your LAN to access websites www.xxyy.com.cn ,
www.aabbcc.com and websites with .net in the end on the Internet while no limit for other
websites, you should specify the following Domain filtering list:
5.9.4 MAC Filtering
Like the IP Address Filtering page, the MAC Address Filtering page (shown in Figure 5-42) allows
you to control access to the Internet by users on your local network based on their MAC Address.
Figure 5-42 MAC address Filtering
Before setting up MAC Filtering entries, you must ensure that Enable Firewall and Enable MAC
Filtering have been selected on the Firewall page. To Add a MAC Address filtering entry, clicking
the Add New… button. The page "Add or Modify a MAC Address Filtering entry" will appear,
shown in Figure 5-43: