Troubleshooting, Freezer, Icemaker – Thermador T24IF User Manual

Page 21

Advertising
background image

21

Troubleshooting

Freezer

Fault

Possible cause

Remedial action

Appliance has no cooling capacity.

The interior light does not function.

The display does not come on.

Power failure; the fuse has actuated;

the plug has not been inserted in the

electrical outlet properly.

Check that the power is on.

The fuse must be switched on.

Check the plug.

The refrigerating unit switches on

f

f

Appliance door opened frequently.

Do not open the door unnecessarily.

g

g

more and more frequently and for

longer.

Large quantities of fresh food placed in

the appliance.

Switch on Super function.

The ventilation openings are covered.

Remove obstacles and dirt.

The temperature in the freezer

compartment is too cold.

Temperature has been set too low.

Set a warmer temperature (see Setting the

temperature").

The interior light does not function.

The bulb is defective.

Change the bulb (see Changing the bulb").

The light switch is sticking.

Check whether it can be moved.

The appliance is giving off odors.

StrongĆsmelling foods have not been

packed in airtight containers.

Clean the appliance. Pack strongĆsmelling foods in

airtight containers (see Odors").

IceMaker

Fault

Possible cause

Remedial action

Ice maker does not appear to be

running.

The ice maker is not connected to the

power supply.

Call customer service.

g

The ice maker has no water supply.

Ensure that the water supply line is connected properly.

The freezer compartment temperature

is too high.

Check temperature of the freezer compartment. If

required, lower the temperature.

Small ice cubes over a prolonged

period.

Other domestic appliances which use

water are in operation.

Avoid using e.g. a dishwasher, washing machine or

shower at the same time.

p

Water filter must be changed.

Instructions for changing the water filter can be found in

the enclosed installation instructions.

Wrong water pressure.

Check water pressure. The water pressure must be

between 25 and 120 p.s.i. (1.72ć8.25 bar).

A wrong water valve has been

installed.

SelfĆtapping valves and 3/16 inch (4.76 mm) saddle

valves reduce the water pressure and may eventually

block the pipe.

The manufacturer is not liable for damage to

property due to an incorrect installation or water

connection.

Advertising
This manual is related to the following products: