Teac CR-H227I - Manual (Page 20)

20
Sleep Timer
The power can be switched off after a specified
amount of time.
Press the SLEEP button repeatedly until desired time
appears on the display.
SLEEP 90 (80, 70 ... 10)
The power will be switched off 90 (80, 70 ... 10)
minutes later.
(normal display)
The sleep timer is off.
< The display is dimmed when you set the sleep
timer.
< If you want to check the remaining time, press the
SLEEP button once. The remaining time will be
displayed for 3 seconds, and return to the normal
display.
Muting
To mute the sound temporarily, press the MUTING
button. Press the MUTING button again to restore
the sound.
< While muting is engaged, “MUTE” blinks on the
display.
< If you change the volume during the muting, the
muting will be canceled.
Headphones
For private listening, first reduce the volume level to
minimum. Then insert the plug from your
headphones into the PHONES jack, and adjust the
volume using the VOLUME buttons. The sound
from the speakers is cut off while the headphone
jack is inserted.
< Subwoofer output will not be cut off, even when
the headphone jack is inserted.
CAUTION
Always lower the volume level prior to plugging in
your headphones. TO AVOID DAMAGING YOUR
HEARING - Do not place your headphones on your
head until after you have plugged them in.
Basic Operation 2