Teac CR-H227I - Manual (Page 28)

28
While in stop or playback mode, you can use the
numeric buttons of the remote control to select a
track.
When you use the numeric buttons, press the CD
button of the remote control first.
Press the numeric buttons to select a track.
Playback starts from the selected track.
For instance, to select track number 35, press “3” and
“5”.
To select numbers less than 10, press the number and
then the ENTER button. As an example, to select
number 5, press “5” and the ENTER button.
(Optionally, you may press just the number “5” and
then wait a few seconds.)
Direct Playback (CD/MP3/WMA)
Search for a part of a track
During playback, hold down the SEARCH button
(m or ,) of the remote control unit (or the
SKIP button of the main unit) for more than 2
seconds and release it when the part you want to
listen to is found.
To skip to the next or a previous
track
During playback, press the SKIP button (. or
/
) repeatedly until the desired track is found.
The selected track will be played from the
beginning.
In the stop mode, press the SKIP button (. or
/
) repeatedly until the track you want to listen
to is found. Press the PLAY button (G) to start
playback from the selected track.
< When the . button is pressed during playback,
the track being played will be played from the
beginning. To return to the beginning of the
previous track, press the . button twice.
< During programmed playback, the next or previous
track in the program is played.
Listening to CD/MP3/WMA 2