Teac CR-H227I - Manual (Page 22)

22
Getting started with iPod
The CR-H227i comes mounted with an adapter for
iPod with color display (40GB, 60GB), “60GB (color) +
Photo 40GB/60GB”. To play your iPod through the
CR-H227i, you have first to check if the factory
mounted adapter fits your model of iPod. If it does
not, you have to replace it with a correct one, as
explained below.
1. Remove the adapter from the Dock of the CR-
H227i.
Hold the left and right sides of the adapter and
gently pull it up.
2. Choose the Dock adapter that fits your iPod
mobile digital device.
“Video 30GB” for iPod with video (30 GB).
“Video 60GB/80GB” for iPod with video (60 GB, 80
GB).
“nano” for iPod nano.
“mini” for iPod mini.
“20GB (color) + Photo 30GB” for iPod with color
display (20GB, 30GB, U2 Special Edition).
“60GB (color) + Photo 40GB/60GB” for iPod with
color display (40GB, 60GB).
“20GB + U2” for iPod with Click Wheel (20 GB, U2
Special Edition).
“40GB” for iPod with Click Wheel (40 GB).
< Use a commercially available adapter to play iPod
with dock connector (with four buttons under the
display).
< When you need to remove the adapter, hold the
left and right sides of the adapter and gently pull it
up.
< When you don’t use the Dock, use the supplied
cover for the Dock to prevent dust from settling on
the Dock.
3. Insert the adapter into the Dock of the CR-
H227i.
Fit the front edge of the adapter into the Dock, and
then press the back edge of the adapter onto the
Dock until a slight “click” is heard indicating the
adapter is inserted correctly.
Compatible iPod Software
In case your iPod will not work with the CR-H227i
or with the remote control unit, software update
may solve the problem.
Visit the Apple website and download the latest
iPod Software.
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
1
2