Thecus Technology 1U4500R - Manual (Page 37)

37
ADS/NT Support
Item Description
WINS Server
Specifies the WINS server if necessary.
Work Group / Domain
Name
Specifies the SMB/CIFS Work Group / ADS Domain Name (e.g.
1U4500).
ADS/NT Support Select Disable to disable authentication through Windows Active
Directory Server or Windows NT.
Authentication Method Select ADS for Windows Active Directory Server, or select NT for
Windows NT
ADS/NT Server Name Specifies the ADS/NT server name (e.g. adservername).
ADS/NT Realm Specifies the ADS/NT realm (e.g. example.com).
Administrator ID Enter the administrators ID of Windows Active Directory or
Windows NT, which is required for 1U4500 to join domain.
Administrator
Password
Enter the ADS/NT Administrator password.
Confirm Password For re-entering password to confirm.
To join an AD domain, you can use the example below to configure the 1U4500:
AD Domain Example
Item Information
Work Group / Domain
Name
Thecus
ADS Support Enable
ADS Server Name ADServer
ADS/NT Realm thecus.com
Administrator ID Administrator
Administrator
Password
***********
Confirm Password ***********
System Management
The System menu gives you a wealth of settings that you can use to configure
your 1U4500’s system administration functions. You can set up system
notifications, view system logs, and even upgrade firmware from this menu.
System Notifications
From the System menu, choose the
Notification item, and the Notification
Configuration screen appears. This screen
lets you have the 1U4500 notify you in case
of any system malfunction. Press Apply to
confirm all settings. See following table for
a detailed description of each item.
NOTE • The DNS server specified in the WAN configuration page should be able to
correctly resolve the ADS server name.
• The time zone setting between 1U4500 and ADS should be identical.
• The system time difference between 1U4500 and ADS should be less than five
minutes.
• The Administrator Password field is for the password of ADS (Active Directory
Server) not 1U4500.