Tandberg 3000 mxp profile – TANDBERG 880 MXP User Manual

Page 248

Advertising
background image

TANDBERG 770/880/990 MXP

234

The DNAM Loudspeaker Cabinet (Center Speakers)*:

ƒ 3-way Center Speaker system
ƒ Frequency range 50Hz - 20kHz
ƒ 2 x 130mm low- and midrange loudspeakers, 8 ohms nominal, high quality
ƒ 1 x 25mm dome tweeter, 6 ohms nominal, high quality
ƒ Crossover filtered audio signals received from DNAM amplifier
ƒ Long time max power 90 Watt on all loudspeakers
ƒ Enclosed MDF speaker cabinet


Integrated Stereo Speakers**:


ƒ 2 * 15W Stereo Speakers, high quality
ƒ Frequency range 100Hz - 20kHz
ƒ Enclosed MDF speaker cabinet


Using the external and optional Stereo Speaker Kit will improve the stereo sound, even on
systems with integrated stereo speakers**. Note that the kit is not available for Mini-DNAM
described below. Before connecting the Stereo Speaker Kit, make sure the complete
videoconferencing system is powered down. When connecting the Stereo Speaker Kit to a
system with already integrated stereo speakers, these integrated speakers will be disabled, and a
new filter and specification setup is loaded when powering up the videoconferencing system.

Please refer to the section

Stereo Speaker Kit

for details.


TANDBERG 3000 MXP Profile:

The TANDBERG Mini-DNAM*:

Advertising
This manual is related to the following products: