Tangent AMP-50 - Manual (Page 15)

14
OPERATION AND FUNCTIONS
Using the function menu
The AMP-50 features a "function menu" that allows
adjustment of the following: Master volume, bass,
treble, balance and loudness (see menu structure
below).
A description of the individual functions will follow on
the next few pages.
Volume control
Balance control
-37,5 -0dB L or R
Volume control
Default setting
Bass control
+/- 14dB
Treble control
+/- 14dB
Loudness
On or Off
PHONO TUNER DVD CD AUX 1 AUX 2 FUNCTION
VOLUME
2
+ 1
Press the VOL+ button to increase volume and press VOL -
to reduce volume.
Turn the volume control to the right to increase the volume
and turn the volume control to the left to reduce the volume.
Note:
dB is a professional term for indicating the amplitude of an
audio signal where 0 dB is the maximum output. You will
see that the LCD display of the unit indicates - dB up to 0
dB which is the maximum volume.
The volume control on the front panel can be turned both
clockwise and anticlockwise to change the volume. The
volume control includes 64 steps, from -78,75 dB for
minimum volume and up to 0 dB for maximum volume.
The display also features a bar in the second line that
consists of 16 squares that indicate the volume. The longer
the bar, the higher the volume.
When the volume control is operated, the first line of the
display will switch from information on input source to
information on volume. When the volume control is no
longer operated, information on input source will be
displayed again after five seconds.
2
1