Tangent AMP-50 - Manual (Page 7)

IMPORTANT INFORMATION
Handling instructions
The top and back panel of the unit may become
warm after prolonged use. This is not due to a
defect.
Turn off the power when the unit is not used.
Protect the power cord
Follow the instructions below to prevent abnormal
operation, electrical shock, fire or personal injury:
Hold the plug firmly when inserting it into the
socket.
Avoid heat-producing devices.
Do not place objects on the power cord.
Do not carry out service work on or change the
power cord.
Positioning
Do not place the unit in any of the following
places:
In sunlight, close to heat-producing devices or in
an enclosed rack.
In places with high temperatures (40C or more)
or high relative humidity (90% or more).
In dirty places as some internal parts may be
damaged.
Touching the internal parts is dangerous and may
cause injury or damage. Do not open the cabinet.
Do not place any foreign matter in the unit.
Interference
Placing the amplifier near a television set, radio
or video player may cause poor picture and
sound quality. In that case, move the amplifier
further away from the television set, radio or
video player.
Condensation
Condensation may occur in the following cases:
When the amplifier is moved directly from a cold
to a warm place.
When the amplifier is used in a room where the
radiator has just been switched on or a place
where the cold air from the air-conditioning
system is directed at the unit.
If the amplifier is used in the summer in a warm
and humid room just after it has been moved
from an air-conditioned room.
If there is steam or a high level of humidity in the
room.
In case of condensation, the amplifier will not work
properly. Turn off the unit. Unplug the unit and leave
it for 2-3 hours. The amplifier will then have
adapted to the environment and any condensation
will have disappeared.
06
Do not put your fingers or any
other objects into the unit