Tangent AMP-50 - Manual (Page 17)

16
OPERATION AND FUNCTIONS
Press the FUNCTION button on the front panel three times until information on balance control is
displayed.
Turn the volume control to adjust balance.
Note
If the balance control is not operated within five seconds, the display will return to the volume
information display.
This amplifier features balance control that allows adjustment of the volume of one loudspeaker at a time
by +/- 38,75 dB, divided into 32 steps.
This function is used to compensate for a non-centred listening position, and makes it possible to get back
the stereo perspective.
Balance control
PHONO TUNER DVD CD AUX 1 AUX 2 FUNCTION
VOLUME
2
1
2
1
Press the FUNCTION button on the front panel four times until information on loudness is displayed.
Turn the volume control to the right to activate the loudness function and to the left to deactivate the
loudness function.
Note
If the loudness function is not operated within five seconds, the display will return to the volume
information display.
This amplifier features a loudness function that allows boosting of the volume of the low frequencies at low
volume.
This function is active at frequencies between 20Hz and 800Hz, and the function is dampened when the
amplifier volume is increased. When the volume is at the maximum setting, the loudness function is
completely cut out.
Loudness
2
1
PHONO TUNER DVD CD AUX 1 AUX 2 FUNCTION
VOLUME
2
1