Inserting a charged battery – Toshiba A85 User Manual
Page 114
114
Mobile Computing
Changing batteries
5.375 x 8.375 ver 2.3
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately. Always dispose
of used battery packs in compliance with all applicable laws
and regulations. Put insulating tape, such as cellophane tape,
on the electrode during transportation to avoid a possible
short circuit, fire or electric shock. Failure to do so could
possibly result in serious injury.
Inserting a charged battery
8
Wipe the terminals of the charged battery with a clean
cloth to ensure a good connection.
9
Insert the charged battery into the slot until the latch
clicks.
Sample inserting the battery
The battery pack has been designed so that you cannot install
it with reverse polarity.
If the battery does not slide into the slot easily, move the
battery release lock to the unlocked position and try again. Do
not force the battery into position.