Toshiba A85 - Manual (Page 66)

66 Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor’s video cable to the RGB (monitor) port
on the left side of the computer.
2 Connect the device’s power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing Fn + F5 , or by
configuring the Display Properties settings.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
Fn + F5 ):
1 Press Fn and F5 simultaneously.
2 While holding down Fn , press F5 repeatedly until the
setting you want takes effect. Briefly pause between
pressing the
F5 key to allow time for the display to
change.
This hot key cycles through the settings in the following
order:
❖ Built-in display only
❖ Built-in display and external monitor simultaneously
❖ External monitor only
❖ Built-in display and TV
❖ TV only
3 Release the Fn key.