Toshiba A85 - Manual (Page 55)

55 Getting Started
Adding memory
5.375 x 8.375 ver 2.3
Installing a memory module
Additional memory modules can be installed in the memory
module slots on the base of the computer. You will need a
standard Phillips No. 1 screwdriver for this procedure.
Before adding external devices or memory, Toshiba
recommends setting up your software. See
“Setting up your
software” on page 45 .
To avoid damaging the computer’s screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
The computer has two memory module slots — Slot A and
Slot B. You can install one or two memory modules.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
If the computer is on, begin at step 1 ; otherwise, skip to step
3 .
1 If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
NOTE