Toshiba A85 - Manual (Page 238)

238 Using ConfigFree™ with your Toshiba Computer
ConfigFree Utilities
5.375 x 8.375 ver 2.3
To review the current Toshiba Wireless Projector settings and
change them if necessary:
1 Click the icon in the system tray.
2 Move the mouse pointer to Toshiba Wireless Projector
(DPJ), then click Settings. The Quick Connect
properties dialog box appears.
3 Complete the settings. Refer to the online help if
necessary.
4 Click OK.
The default connection setting is for Ad hoc mode, therefore, if
the setting on the Toshiba Wireless Projector is in
Infrastructure mode, it will not connect. However, you can
change the settings to Infrastructure mode to match the
settings on the projector.
Sample Projector icon when connected with Quick Connect
If the wireless mode for the wireless setting is set for 5 GHz
(802.11a), Quick Connect changes this mode to 2.4 GHz
(802.11b) and then connects to the projector.
NOTE