Tektronix Phaser 350 - Manual (Page 124)

3 Printing Basics
3-46 Phaser 350 Color Printer
3. Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
4. Choose Download PostScript File from the Utilities menu.
5. Select the Font Sampler file from the list, then click Open. (This file
was installed in the Samplers folder inside the PhaserTools folder.)
6. If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
Printing a font sampler from a PC
You can print a sample of the printer’s resident fonts by downloading the
FONTS.PS utility file to the printer.
1. Locate the FONTS.PS file in the SAMPLERS directory either on the
printer’s CD-ROM or the Printer Software for Windows diskette.
2. Copy the FONTS.PS file to your hard disk or use the file directly
from the CD-ROM.
3. Use one of the following methods to send the FONTS.PS file to
the printer:
■ PC users : Use the DOS COPY command to send the file to the
printer. (Windows 3.1 users can also use the Copy command in the
File Manager
.)
■ Workstation users : Send the file to the printer as you would any
PostScript file.