Tektronix Phaser 350 - Manual (Page 61)

Getting Set Up 2
User Manual 2-45
Setting up a PostScript driver for Windows NT 4.0
TekColor color corrections and other PostScript Level 2 printer features are
supported by the Windows NT 4.0 PostScript driver. Follow the instructions
below to update your Windows NT 4.0 PostScript driver for use with a
Phaser 350 printer. Refer to your Microsoft Windows NT documentation for
details on features in the driver.
Note The Windows NT 4.0 driver does not support the PhaserMatch ™
application.
These instructions assume a basic familiarity with Windows NT operation
and terminology. For additional information about Windows NT, refer to
your Microsoft Windows NT documentation.
1. Locate the Microsoft® Driver for Windows NT™ 3.51 and 4.0
(for i386) diskette that was shipped with your printer. Insert the
diskette into your computer’s disk drive.
2. Click the Start icon in the taskbar on your screen. In the menu that
appears, click Settings. In the Settings menu, click Printers.
3. In the Printers Folder, double-click the Add Printer icon.
4. From the Add Printer menu, follow the Add Printer Wizard
instructions until the Manufacturers/Printers window appears.
5. Click the Have Disk button.
6. In the Install From Disk dialog box, type in the disk drive location
of the printer’s diskette, such as A:, then click OK.