Tektronix Phaser 350 - Manual (Page 188)

6 Troubleshooting
6-6 Phaser 350 Color Printer
Problems and solutions
Refer to the following tables if you encounter problems with the printer.
Media feeding or jamming problems
Symptom Solution
Media feed or mispick
problems at the standard
tray. Use standard office paper 16 to 32 lb. (60 to 120 g/m
2
) or
Tektronix transparency media. Do not load the tray
beyond the fill line. Paper tray capacity is 200 sheets
paper or 50 sheets transparency. Transparency tray
capacity is 175 sheets transparency.
Refer to “Cleaning for upper media tray jams: media-pick
roller” on page 5-30.
Paper feed problems at
the lower paper tray. Use standard office paper 16 to 32 lb. (60 to 120 g/m
2
).
Do not load the tray beyond the fill line. Paper tray
capacity is 500 sheets.
Paper jamming inside
the printer. Remove and re-latch the maintenance tray. Refer to
“Replacing the maintenance tray” on page 5-7.
Refer to “Cleaning for jams and ink smears: paper-feed
rollers” on page 5-19.
Paper jamming at
manual feed slot. Wait for the front panel prompt before feeding paper.
Align paper against the left edge of the manual feed slot.
Make sure that the proper page size is selected for the
slot.
Image quality problems
Symptom Solution
Missing or light color
stripes on prints. Refer to “Cleaning for light stripes: printhead” on
page 5-14.
Ink streaks or oil on front,
back or edges of print. Do not print on both sides of the media. Ink may be
offset onto the internal paper path.
Refer to “Identifying cleaning solutions” on page 5-13.
Transparency print
quality poor. Use Tektronix premium transparency media. Use the
transparency tray for printing transparencies and specify
Transparency in a supported printer driver. Refer to
“Transparency quality tips” on page 3-37.