Telular SX4e TDMA - Manual (Page 6)

Plug in Your Telephone
1) Locate the modular line port on your phone and plug in one end of a standard phone cord.
2) Connect the other end of the cord to the telephone port on the side of your SX4e - see Figure 7.
NOTE: An RJ-11 connector will fit into the phone port.
NOTE: The SX4e does not support direct computer modem (data) operation through the phone
port or fax port. See the Digital Data Service section of this manual for computer digital data
operation.
3) To add more telephones, plug in a line splitter (not supplied) to the phone port - see Figure 8.
NOTE: The SX4e will only let you make one phone call at a time.
SX4e TDMA 800 • SX4e Tri-Mode 6 Technical Manual
Figure 7- Connect the SX4e to a telephone.
To Phone Port
To Phone(s)
Phone Cord
Figure 8 – An optional Line Splitter lets
you connect additional phones to your
Phonecell SX4e.
Line
Splitter
Phone Port
Phone
Cords