Tascam US-144MKII - Manual (Page 12)

12
TASCAM US-144MKII
3 – Installation
System requirements
See the TASCAM website for updated
information about OS compatibility.
Windows
Windows XP 32-bit SP2/SP3
Windows XP 64-bit SP2
Windows Vista 32-bit SP2
Windows Vista 64-bit SP2
or later
Supported computer system:
Windows compatible computer with a USB
port (USB 2.0 is recommended)
CPU/clock: •
Pentium 4 1.4 GHz or faster
AMD Athlon 1.4 GHz or faster
(or equivalent processor)
Memory: •
512 MB or more for Windows XP 32-bit
and Windows Vista 32-bit
1 GB or more for Windows XP 64-bit and
Windows Vista 64-bit
NOTE
Although this product has been checked for
use with typical computers that meet the
above operating requirements, we cannot
guarantee that it will operate with all
computers that meet these requirements.
Please be aware that even under the same
conditions, processing capability may vary
depending on differences of the design
and system.
Mac OS X
Supported operating system:
Mac OS X 10.4.11
Mac OS X 10.5.6
or later
Supported computer system:
Apple Macintosh series equipped with a
USB port as standard equipment
CPU/clock: •
Power PC G4 1 GHz or faster, or Intel
processor
Memory: •
512 MB or more
Installing the driver
In order to use the US-144MKII, you must
install the appropriate driver into your
computer. As described below, this is an
easy process using the CD-ROM included
with the US-144MKII.
Driver are updated from time to time. You
can download the most recent version of the
driver from the TASCAM website <http://
www.tascam.com/>.
Do not connect the US-144MKII to your
computer before you have installed the driver.
CAUTION
Handle the enclosed CD-ROM with care. •
If the disc becomes scratched or dirty,
your computer may be unable to read it
and the software cannot be installed. If
the disc becomes unreadable, a fee will
be charged for its replacement.
Never attempt to play the enclosed CD- •
ROM in a conventional audio CD player,
as the resulting noise may damage your
speakers or your hearing.