Tascam US-144MKII - Manual (Page 25)

TASCAM US-144MKII
25
Windows Vista and Windows
Media Player
Close all applications and then open 1
the “Control Panel” from the “Start”
menu.
Open “
2 Sound.”
NOTE
If the above item does not appear, click
“Hardware and Sound” and it will appear.
Click the “ 3 Playback” tab, click
“Speakers US-144MK2” and click the
“Set Default” button. This moves the
green check mark to “Speakers US-
144MK2.”
Click “ 4 OK.”
Start Windows Media Player, select an 5
audio file and begin playback.
NOTE
If you change the setting while Windows •
Media Player is running, the software
will not recognize that the device has
been changed. In this case, restart
Windows Media Player.
If you still cannot hear sound after •
making the settings and completing the
procedures above, restart the computer.
If you make this setting, sound will •
be output through this unit, but no
sound will be output by the computer’s
speakers or headphone jack.
If you want to output Windows Media •
Player through this unit’s DIGITAL OUT,
set the “DIGITAL OUTPUT” to “ch1 and
ch2” in the Control Panel.
6 – Application Guide