Topcom BUTLER 550 - Manual (Page 29)

4.7.2 Subscribe the handset manually to the base station
If you wish to select only one specific base station, you can refine
the programming by adding the 15 digit ID-number. You will find
this number at the back of the manual.
• Enter the Set button, followed by “8”.
• Enter the 15 digit ID-code of the desired base station
(backside manual).
• Press the Redial button.
• Enter the 4 digit base code of the base station.
• Press the Redial button.
• Press the Set button again to confirm.
The numbers of the base station and the handset appear in the
middle and on the right side of the display.
4.7.3. Desubscribe the handset
A handset can be desubscribed by following the next
p ro c e d u re :
• Press the Set button.
• Press “9 2 5 0”.
• Press the Set button again to confirm.
The handset is now desubscribed and can only be used again
on the base station in question and this only after a renewed
subscription.
Remark :
If the handset is subscribed to multiple base stations and it is
being desubscribed from one, it will automatically choose
another base station.
5 Programming the handset
The following settings are only valid for the respective
handset. Each handset can have various settings.
5.1 Programming memory numbers
Every handset has an individual memory for 10 memory
numbers.
• Press the Set button.
• Press the Memory button.
• The memory number appears on the left side of the display.
• Enter the memory location (0-9) under which you want to
program the number and press the Redial button.
• Enter the telephone number. If you wish to enter a pause,
you have to press and hold the #-button for a few
seconds (see chapter 4.3 - 4.4).
• Press the Set button to confirm.
Repeat the same procedure for programming the other
numbers.
5.2 Activate/deactivate Babycall
You can program your handset in such a way that pressing
any key will automatically activate the dialling of one specific
telephone number.
5.2.1 To program a Babycall number
• Press the Set button.
• Press “2 7 1”.
• Enter the telephone number.
• Press the Set button again.
54 55