5 inserting batteries in the remote control, Inserting batteries in the remote control – Topfield DV3 Digital Terrestrial Receiver Personal Video Recorder TF 6000 PVRt User Manual

Page 22

Advertising
background image

14

Setup

Connecting to the video recorder by SCART connector

Plug one end of the SCART cable into the

VCR

socket on the

digital receiver. Then, plug the other end of the SCART ca-
ble into the input SCART socket on your video recorder if
you wish to record a broadcasting program with your video
recorder; otherwise if you wish to watch the video that the
video recorder plays back just through the digital receiver,
plug the other end into the output SCART socket.

2.5

Inserting batteries in the remote control

To insert the batteries, open the battery compartment by re-
moving the lid, and then insert the batteries observing the po-
larity, which is marked on the base of the battery compart-
ment. Close the battery compartment after that.

If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for dam-
age resulting from leaking batteries.

NOTE

Batteries, including those which contain no heavy met-
als, may not be disposed of with household waste.
Please dispose of used batteries in an environmentally
sound manner. Find out about the legal regulations
which apply in your area.

Advertising