Topfield DV3 Digital Terrestrial Receiver Personal Video Recorder TF 6000 PVRt - Manual (Page 35)

4.2 Resetting to factory settings 27
You should set the Search Mode option to Auto at the first ser-
vice search after connecting the digital receiver. The digital re-
ceiver will search all available services with automatic search
mode. Transponder numbers range from 6 to 12 at VHF and
28 to 69 at UHF.
To search a certain transponder, set the Search Mode option
to Manual , and select your desired transponder at the Channel
option.
You can search pay services as well as free services. To search
only free services. set the
FTA/Scrambled option to FTA only .
FTA means free service. To search only pay services, set it to
CAS only . CAS means pay service. To search both free services
and pay services, set it to FTA + CAS .
To start service search, select the Service Search command.
Then appears a list box, in which found services will be listed.
Press the
✄
✂ ✁ OK button to save found services when a service
search has been completed. To stop service search on the way
or exit without saving, press the
✄
✂ ✁
EXIT button.
4.2 Resetting to factory settings
The digital receiver maintains the following data:
• Service list
• Favorite list
• Timer events
• Preference settings
You can reset all data of the digital receiver. To reset all the
data, select the
Installation > Factory Setting menu. Then a
confirmation box appears. With the Yes reply, service entries,
favorite entries and timer events will be all deleted, and pref-
erence options will be reset to the manufacturer’s factory set-
tings.