4 editing a recording, 1 to erase a block from a recording, 2 to store a block from a recording – Topfield DV3 Digital Terrestrial Receiver Personal Video Recorder TF 6000 PVRt User Manual
Page 59: Editing a recording, To erase a block from a recording, To store a block from a recording
7.4 Editing a recording
51
7.4
Editing a recording
7.4.1
To erase a block from a recording
You can cut out a block such as commercial film from a record-
ing file by performing the following steps:
1.
Start playback of a recording file you want.
2.
Press
button to display a progress bar.
3.
Find one end position of a block you want to specify
with
button or
button.
4.
Press
button at the position, then the pointer starts
to blink.
5.
Find the other end postion.
6.
Press
button at the position again, then a confirma-
tion box appears.
7.
Select the
Cut
command, then the block is erased.
7.4.2
To store a block from a recording
You can store a block from a recording file by performing the
following steps:
1.
Start playback of a recording file you want.
2.
Press
button to display a progress bar.
3.
Find one end position of a block you want to specify
with
button or
button.
4.
Press
button at the position, then the pointer starts
to blink.
5.
Find the other end postion.
6.
Press
button at the position again, then a confirma-
tion box appears.