A4.6 test print (cont.) – Toshiba B-492L User Manual
Page 65
APPENDIX 4 SYSTEM MODE
EO1-33032
A4.6 Test Print
A4-15
A4.6 Test Print (Cont.)
While in a Pause condition press and hold the
[RESTART]
key until
“<0>RESET” appears in the display.
Then, press the
[FEED]
key four times, and “<4>TEST PRINT” message
appears.
Specifying the Print Condition for the Test Print
The print conditions for Test Printing should be specified before printing.
When “<4>TEST PRINT” appears, press the
[PAUSE]
key.
Issue Count Setting
To enter the Issue Count Setting menu, press the
[PAUSE]
key.
After selecting the issue count, press the
[PAUSE]
key to go to Print
Speed Setting.
35,17 &21',7,21
[RESTART]
[FEED]
,668( &2817
,668( &2817
,668( &2817
,668( &2817
,668( &2817
,668( &2817
,668( &2817
,668( &2817
,668( &2817
,668( &2817
!7(67 35,17
!5(6(7