Tascam GA-100CD - Manual (Page 11)

2 – Part names and functions
TASCAM GA-100CD
11
; GUITAR CANCEL key
Press this key to turn Guitar Cancel ON and OFF.
Press and hold this key to open the Guitar Cancel
setting menu. In this menu, press this key to cycle
through setting items. (See “Canceling guitar
sounds” on page 19.)
z TUNER/SETUP key
Press this key to turn the tuner ON and OFF. Make
detailed tuner settings using the Setup menu. (See
“Using the tuner” on page 20.)
Press and hold this key to open the Setup menu
to adjust the time display mode as well as other
functions, including footswitch and tuner settings.
Once in the Setup menu, press this key to cycle
through setting items. (See “Changing settings” on
page 21.)
x OSC/CAL key
Press this key to start the oscillator and output an
adjustable pitch signal from the sub-speakers. (See
“Using the oscillator” on page 20.)
Press and hold this key to access the Calibration
menu and set the standard tuning frequency. (See
“Setting the standard tuning frequency” on page 19.)
c Setting adjustment keys
Use the 3 setting change keys to adjust settings.
/DOWN/LEFT : Reduce values, flatten the pitch or
shift the stereo position to the left.
/NORMAL/CENTER : Restore the default value,
cancel pitch changes or reset the stereo position to
the center.
/UP/RIGHT : Increase values, sharpen the pitch or
shift the stereo position to the right.
v TEMPO key
Press this key to turn tempo control ON and OFF.
Press and hold this key to open the Tempo setting
menu. (See “Setting the tempo” on page 18.)
b KEY key
Press this key to turn key adjustment ON and OFF.
Press and hold this key to enter the Key setting
menu. (See “Adjusting the key” on page 19.)
n VSA key
Press this key to activate Variable Speed Audition
(VSA). VSA appears on the LCD. When ON, VSA
keeps the original pitch of the music even when the
tempo is changed.
m Track skip and search keys ( ∆/µ , ˚/≤ )
Press ∆/µ and ˚/≤ during CD playback to
skip to previous or later tracks.
Press these keys when playback is stopped to select
a track to play. (Press PLAY ( ¥ ) to start playback.)
To fast forward during CD playback, press and hold
˚/≤ . To rewind, press and hold ∆/µ .
Fast-forward and rewind speed gradually increases
as long as the key is held down.
, STOP ( ª ) /MTRO key
Press to stop CD playback. Press and hold this key
to open the Metronome menu. (See “Using the
metronome” on page 20.)
. PLAY/PAUSE key ( ¥/π )
Press to start playback of a stopped or paused CD or
pause a playing CD.