Tascam GA-100CD - Manual (Page 13)

2 – Part names and functions
TASCAM GA-100CD
1
CD Trainer LCD
( * )Q W E R U T Y
IO P S A
* PLAY indicator
Appears during playback.
( PAUSE indicator
Appears when playback is paused .
) T.REMAIN/REMAIN indicator
Indicates the meaning of the time displayed
according to the current setting.
T.REMAIN = remaining time of entire CD
REMAIN = remaining time of currently playing track
Q VSA indicator
Appears when VSA is ON. (See “Changing tempo
without changing key” on page 19.)
W TUNER indicator
Appears when the tuner is in use. (See “Using the
tuner” on page 20.)
E TEMPO indicator
Blinks when the Tempo menu is active, and lights
when tempo control is ON. (See “Setting the tempo”
on page 18.)
R KEY indicator
Blinks when the Key menu is active and lights when
key adjustment is ON. (See “Adjusting the key” on
page 19.)
T CD EFF indicator
Blinks when the Guitar Cancel menu is active, and
lights when Guitar Cancel is ON. (See “Canceling
guitar sounds” on page 19.)
Y SET UP indicator
Blinks when the Setup menu is active. (See
“Changing settings” on page 21.)
U Tuning meter
Shows pitch during tuning. The center is the correct
pitch. The more the indicator lights to the left, the
flatter the pitch and the more it lights to the right the
sharper the pitch.
I LOOP indicator
Appears when set to loop playback ( ALL / SGL ). (See
“Repeat playback of a selected loop” on page 18.)
O 1
Appears when set to single ( SGL ) repeat playback.
P I-O
Blinks when the loop repeat IN point is set and
lights when the OUT point is set.
A Track number/time display
Shows the currently selected track number (above
TRACK) and time during playback in minutes ( M ) and
seconds ( S ). Also provides information when making
various settings.
S ,
Shows pitch when key adjustment is ON.