Important warranty information – True Manufacturing Company TR1RRI-1S User Manual

Page 22

Advertising
background image

............ www.truemfg.com ............

True Food Service Equipment, Inc.

20

20

Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss,

and lost sales... which are not covered by warranty.

If you keep the Condenser clean you will minimize your service expense and lower your electrical costs. The Condenser

requires scheduled cleaning every thirty days or as needed.

Air is pulled through the Condenser continuously, along with dust, lint, grease, etc.

A dirty Condenser can result in NON-WARRANTEED part & Compressor Failures, Product Loss, and Lost Sales.

Proper cleaning involves removing dust from the Condenser. By using a soft brush, or vacuuming the Condenser with a shop

vac, or using CO2, nitrogen, or pressurized air.

If you cannot remove the dirt adequately, please call your refrigeration service company.

On the Spec Series units the condenser is accessible on the top of the unit. On certain models you must remove the cabinet

rainshield to expose the Condenser. (TR, TA, and TG models)

The Condenser looks like a group of vertical fins. You need to be able to see through the condenser for the unit to function at

maximum capacity. Do not place filter material in front of condensing coil. This material blocks air-flow to the coil similar to

having a dirty coil.

THE CLEANING OF THE CONDENSER IS
NOT COVERED BY THE WARRANTY!

HOW TO CLEAN THE CONDENSER:
1. Disconnect the electrical power to the unit.
2. Remove the rainshield.
3. Vacuum or brush the dirt, lint, or debris from the finned condenser coil.
4. If you have a significant dirt build up you can blow out the condenser with compressed air. (CAUTION MUST BE USED to

avoid eye injury. Eye protection is recommended.)
5. When finished be sure to replace the rainshield. The rainshield protects the condenser.
6. Reconnect the electrical power to the unit.
If you have any questions, please call TRUE Manufacturing at 636-240-2400 or 800-325-6152 and ask for the Service

Department. Service Department Availability Monday-Friday 7:30 a.m. to 6:00 p.m. and Saturday 8:00 a.m. to 12:00 p.m. CST.

IMPORTANT WARRANTY INFORMATION

MAINTENANCE, CARE & CLEANING

Advertising