Topfield TF 5100 PVR - Manual (Page 32)

26 Preference Settings
3.5 Adjusting the on-screen display
You can adjust the transparency level of the on-screen display.
Select the System Setting menu and set the OSD Transparency
option as you desire. Its available range is from 0 to 50 percent.
You can adjust the display time of the information box. Re-
fer the information box to §
5.2.2 . To adjust its display time,
select the System Setting menu and set the Info Box Display
Time
option as you desire. Its available range is from 1 to 30
seconds. If you set this option to No Info Box, the information
box will not be displayed when you switch services. However,
pressing the
button displays the information box. If you
set this option to Never Hide, the information box will always
be displayed.
In addition, you can raise or lower the position of the informa-
tion box. Select the System Setting menu, and then set the Info
Box Position
option as you desire. Its available range is from
−10 to +3 line. The more high the value is set, the more low
the information box will be positioned.
3.6 To use the time shift feature
You can use the time shift feature with this digital receiver.
Time shift means that the most recent hour of the television
service you are watching gets saved on the hard disk of the
digital receiver. To enable this feature, select the System Set-
ting
menu and set the Time Shifting option to Enable. See § 5.5
for how to use this feature.