2 controlling the digital receiver, 1 the front panel, Controlling the digital receiver – Topfield TF 5100 PVR User Manual

Page 8: The front panel

Advertising
background image

2

Introduction

• You can make a favorite list with your favorite channels.

• You can view the information of the current television or

radio program.

• You can update the firmware of the digital receiver to

the latest version, which will be provided by the manu-
facturer.

• You can record one broadcasting service while you are

currently watching another.

• The large storage capacity of the built-in hard disk drive

allows you to record up to 80 hours of program—in case
of 160 gigabytes—in excellent picture and sound quality.

• Time shift is a special technical feature available on the

TF 5100 PVR. You can pause the program you are watch-
ing and resume it again at a later time. You can also
quickly go to whatever part of the current program by
fast foward and rewind search.

1.2

Controlling the digital receiver

The digital receiver can be operated with the remote control
and the buttons on the front panel.

NOTE

When the digital receiver is off but plugged to a wall outlet,
we say that it is in standby mode; on the other hand, when
it is on, it is in operation mode. You should keep the digital
receiver plugged to a wall outlet on standby mode so as it can
run timer events at any time.

1.2.1

The front panel

The front panel of the digital receiver has buttons to control
the digital receiver, and specific lamps and a display to indi-
cate its status. The following indicates what they mean.

Advertising