2 transferring receiver data, Transferring receiver data – Topfield TF 5100 PVR User Manual

Page 46

Advertising
background image

40

Listing Services

Similarly, you can delete a favorite entry with the

 

OK

button

in the favorite list. Besides, you can rearrange a group’s fa-
vorites by moving a favorite entry. To move a favorite entry,
put the highlight bar on a desired entry to move and press the

button; then the selected entry becomes dark. Move it to a

desired place and press the

 

OK

button.

To add radio services, press

button; then radio service en-

tries will be listed in the service list. To recall the television
service list after adding radio services, press

button again.

With your favorite service list, you can select your favorite ser-
vices more easily. Refer to §

5.2

for more information.

6.2

Transferring receiver data

The digital receiver retains such data as follows:

• Service list

• Favorite list

• Preference settings

It is possible to transfer receiver data to your digital receiver
from another same digital receiver connecting them with a RS-
232 cable.

To transfer receiver data, perform the following steps:

1. Plug one end of a RS-232 cable (9 pin D-

sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.

2. Turn on both of them.

3. Select the Installation > Transfer Firmware

> Transfer Data to Other IRD menu.

4. Restart the digital receiver.

Advertising