Topfield TF 5100 PVR - Manual (Page 49)

7.1 Recording a program 43
7.1 Recording a program
Once recording has started, a symbol like the left fig-
ure will be displayed on the top right of the screen for
a few seconds. When you are watching a service dif-
ferent from the service being recorded, you can view a number
on the center of the symbol, which indicates the order that the
recording is started.
NOTE
When a recording is finished, it might not be saved if its
recording duration is less than one minute.
7.1.1 Instant recording
To instantly record the program you are watching at present,
press the
button. Pressing the button pauses the current
recording. To resume recording press it again.
After a recording is started,
pressing the
displays a box
like the left figure, in which you
can set the recording duration.
To specify an arbitrary recording duration, set the Duration op-
tion as you desire with the
✄
✂ ✁ V − and
✄
✂ ✁ V + buttons and press the
✄
✂ ✁
OK button; the recording will end at the specified time.
If the information about the next program is provided by the
electronic program guide, the After this program and After next