Triax DVB 63S - Manual (Page 14)

14
S E T T I N G S
Settings > Basis
UHF-output channel
See page 7.
SCART-mode:
In this line set by means of the OK-button in ac-
cordance with your tv FBAS, RGB or S-VHS. For
standard-tv you let the setting RGB remain.
Subtitling:
In this line set by means of the OK-button you
can select subtitle on or off.
Installation
When you have set your receiver according to
your individual requirements, you must if required
now set the receiver in accordance with your aeri-
al. In the factory your receiver was prepro-
grammed to ASTRA and EUTELSAT with universal
LNB (see chapter Technical Terms). After putting
the receiver into operation, these programs will be
received on a corresponding receiver system
without further settings.
If you also want to receive from other satellites, or
want to use another LNB, you set your receiver to
the data required as follows:
Press menu to enter the main menu.
Mark with the cursor-button the line settings.
Confirm by pressing OK.
Now the menu settings appear.
Mark the line LNB-settings by means of the cur-
sor-button up/down.
Now the menu LNB appears.