Triax DVB 63S - Manual (Page 15)

15
> Settings > LNB
The following settings can be made in this
sub-menu:
DiSEqC on/off
DiSEqC (see Chapter Technical Terms) is
used for the control of major aerial systems.
On this line the DiSEqC is switched on/off
by means of the OK-button.
Setting of matrix switch and LNB-features
The menu lists the 4 switch criteria of DiSE-
qC-control. Your receiver has been pre-pro-
grammed to receive ASTRA in switch setting
A/A and EutelSat in a multiswitch setting B/
A. If the matrix switch of your receiver sys-
tem is built differently, or receives from other
satellites, you can adapt the receiver to suit
your needs as follows:
Select the satellite or DiSEqC-setting you
want to change (e.g. DiSEqC AB/no satel-
lite) by marking this line by means of the
cursor-button up/down.
Press the OK-button.
A list of different satellites now appears.
Mark by means of the cursor-button the
satellite you want to select. By means of the
cursor-button up/down the cursor is
moved one line up or down, with the cursor-
button left/right you go to the next or previ-
ous page. If the satellite wanted is not listed,
you select a free place, marked UserX (e.g.
User1).
Confirm with OK.
The field marked is now being inserted in the
place previously marked in the menu
>Settings>LNB.
S E T T I N G S